AN EXPLORATORY STUDY ON MODERN 3D COMPUTERISED BODY SCANNING SYSTEM AND VARIOUS TYPES OF PATTERN MAKING SOFTWARE’S WITH THEIR CONSTRUCTIVE IMPLEMENTATION IN APPAREL INDUSTRY

  • Mustafijur Rahman School of Materials, Faculty of Engineering and Physical Sciences, The University of Manchester, UK
  • Rishad Rayyaan School of Materials, Faculty of Engineering and Physical Sciences, The University of Manchester, UK
  • Md. Golam Nur Lecturer, Department of Textile Engineering, Primeasia University, Bangladesh
  • Sk. Nazmus Saaqib Lecturer, Department of Textile Engineering, Primeasia University, Bangladesh
  • Md. Moynul Hassan Shibly Lecturer, Department of Textile Engineering, Primeasia University, Bangladesh

Abstract

Nowadays Computer-aided design (CAD) techniques such as Lectra Modaris is becoming exceedingly popular in the apparel industries worldwide for pattern construction because of its accuracy, efficiency and time-saving solutions to much arduous operation (Sayem et al., 2010). The principle objective of this article is to draft a set of pattern pieces by applying Lectra Modaris design environment after selecting a convenient style of trouser by different retail websites or fashion manuals. This paper contains all the essential draft patterns for the selected trouser such as front, back, waistband, pocket bag, pocket facing and fly piece which are constructed in Lectra Modaris V6R1 design software. These patterns are prepared after incorporating measurements into the design extracted from the body-scan point cloud data and from manual tape measurement. This paper also discussed briefly about the pattern construction procedure, different types of body scanning system and various types of pattern making software.

Downloads

Metrics

PDF views
1,155
Jul 2015Jan 2016Jul 2016Jan 2017Jul 2017Jan 2018Jul 2018Jan 2019Jul 2019Jan 2020Jul 2020Jan 2021Jul 2021Jan 2022Jul 2022Jan 2023Jul 2023Jan 2024Jul 2024Jan 2025Jul 2025Jan 202698
|
Published
2015-05-29
How to Cite
Rahman, M., Rayyaan, R., Nur, M. G., Saaqib, S. N., & Shibly, M. M. H. (2015). AN EXPLORATORY STUDY ON MODERN 3D COMPUTERISED BODY SCANNING SYSTEM AND VARIOUS TYPES OF PATTERN MAKING SOFTWARE’S WITH THEIR CONSTRUCTIVE IMPLEMENTATION IN APPAREL INDUSTRY. European Scientific Journal, ESJ, 11(15). Retrieved from https://eujournal.org/index.php/esj/article/view/5619
Issue
Vol 11 No 15 (2015): ESJ May Edition
Section
Articles